Specification

HAS-U Anchor Rod

HAS Anchor Rod

HAS-RTZ Anchor Rod

HAS-TZ Anchor Rod

Material, corrosion

Carbon steel 5.8, Carbon steel 5.8 HDG, Carbon steel 8.8, Carbon Steel, Hot-Dip Galvanised, Stainless steel, A4

Carbon steel 5.8, Carbon steel 5.8 HDG, Carbon steel 8.8, Carbon Steel, Hot-Dip Galvanised, Stainless steel, A4

Stainless steel, A4

Carbon steel, zinc-plated

PROFIS software

Yes

Application

Baseplate

Baseplate

-

-

Environmental conditions

-

-

Costal areas / Roads with de-icing salt, Outdoor (more than 1km to coast), Outdoor with heavy industrial pollution

Dry indoor

Base materials

-

-

Concrete (cracked), Concrete (non-cracked)

Concrete (cracked), Concrete (non-cracked)

Approvals / test reports

-

-

BZS/shock, ETA, Fire

BZS/shock, ETA, Fire

Type of fastening

-

-

Pre-fastening

Pre-fastening

Applications

• Fastenings in concrete and masonry in combination with compatible Hilti HIT adhesive anchoring systems

• ETA approval for fatigue fastenings (only HAS-U A4 M8-M24)

• Fastenings in concrete and masonry in combination with compatible Hilti HIT adhesive anchoring systems

• Suitable for fastenings in cracked concrete in combination with Hilti HVU-TZ capsules

• Suitable for fastenings in cracked concrete in combination with Hilti HVU-TZ capsules

Advantages

• Available in a wide range of anchor rod diameters (M6-M39) and material compositions (carbon steel, hot-dip galvanised, A4 stainless steel)

• More peace of mind - already included in ETAs of HIT injectable mortars

• Head marking for easy verification of steel grade and rod length, even after installation

• Inspection certificate 3.1 or 2.2 - confirmation of material and mechanical proprieties available upon request

• Increased productivity - pre-cut and pre-packaged with nut and washer, eliminating need to cut metre rods on site

• Available in a wide range of anchor rod diameters (M8-M24) and material compositions (carbon steel, hot-dip galvanised, A4 stainless steel)

• More peace of mind - already included in ETAs of HIT injectable mortars

• Inspection certificate 3.1 or 2.2 - confirmation of material and mechanical proprieties available upon request

• Increased productivity - pre-cut and pre-packaged with nut and washer, eliminating need to cut metre rods on site

• Custom lengths and additional diameters available upon request

• High-performance capsule anchor

• Minimal sensitivity to cracked concrete (tension zone)

• Minimal sensitivity to dynamic loads

• Minimal sensitivity to application irregularities

• Highly flexible solution

• High-performance capsule anchor

• Minimal sensitivity to cracked concrete (tension zone)

• Minimal sensitivity to application irregularities

• Highly flexible solution

• Short spacing and edge distances