Details

---

HIGH PERFORMANCE POLYSULPHIDE JOINT SEALANT


Description

---

CORKJOINT J-Seal® PS-100 is a high performance polysulphide joint sealant for use in a variety of applications. It has excellent adhesion to most substrates and can be used in immersed conditions.

J-Seal® PS-100 is available in both gun grade and pouring grade:

Gun grade - Suitable for vertical or horizontal applications and is available in a ready to mix, two and a half litre tin containing the base and curing agent in correct proportions.

Pouring grade - Suitable for horizontal applications and is available in a four litre pack with base and curing agent in separate tins.


Uses

---

• Structural floor joints

• High movement joints & construction joints

• General purpose joint sealing

• Highway & Roads

• Water retaining and excluding structures

• Subways & MRT platforms

• Warehouses & industrial factory floors

 

Limitation

---

J-Seal® PS-100 is not recommended for:

• Overhead joints

• Movement joints having a Movement Accomodation Factor (MAF) of > 25%

• Over painting with enamel or rigid paints (paint compatibility with sealant shall be checked prior to painting)

• Applied in joints wider than 50mm

• Applied in joints less than 5mm in width and depth

• Use for glazing applications

• High and/or sharp point loads

• Do not apply in rain or wet conditions, or at temperatures below 5ºC

• Do not part mix

Colour

---

• Grey

 

Packaging

---

• Gun grade: 2.5 L / set

• Pouring grade: 4 L / set or 18 L / set