Details

---

FAST CURING POLYURETHANE TRAFFICABLE JOINT SEALANT

 

Description

---

BOSTIK SEAL 'N' FLEX FC Fast Curing Polyurethane Trafficable Joint Sealant is a fast cure high performance one component polyurethane elastomeric joint sealant. When fully cured; Bostik Seal ‘N’ Flex FC will provide a tough, flexible seal capable of cyclic expansion and compression to 50% of original joint width without primer on most substrates. Bostik Seal ‘N’ Flex FC is unaffected by ultra-violet radiation, atmospheric contamination or pollution. Its excellent weather ability enables it to retain its original properties after years of expose. (C.S.I.R.O. RILEM expose study).

 

Uses

---

• Trafficable – Plats, stairs, roads, runways, aprons, and pavements

• Vertical – Precast, block work, aluminums, plasterboards, timber and most common building substrates

• Pick Resistant – Prison, cells, schools, and public, amenties

• Chemical Resistant – Service stations, hangers, aprons and bonded areas

• Fungal Resistant – Wet areas, wash down bays, food processing

 

Advantages

---

• Fast-curing: The sealant is designed to cure quickly, allowing the joint to be opened to foot traffic within just a few hours after application, and vehicle traffic within 24 hours.

• High strength: The polyurethane formula of the sealant gives it high strength, which allows it to withstand the stresses and strains placed on trafficable floor joints. For example: Plats, stairs, roads, runways, aprons, and pavements

• Chemical resistant: The sealant is highly resistant to a wide range of chemicals, including oils, fuels, and solvents, which makes it suitable for use in environments where these substances may be present.

• UV resistant: The sealant is formulated to be UV resistant, which helps to prevent it from breaking down or deteriorating when exposed to sunlight or other forms of UV radiation.

• Easy to apply: The sealant is easy to apply with a standard caulking gun, and can be tooled and smoothed easily with a putty knife or similar tool.

• Australia made

• Aromatic technology

• +25% movement

• Abrasion & pick resistant

• AS 4020

• Resistant to fungals attach AS 1157.2

• Acoustic properties

• ISO 9002

• No priming required for most substrates

• No discolouration

• Low modulus elastometric sealant

• Security applications

• Potable water approval

• Petroleum & wash down environment

• Chicken, poultry & food environment

• Paintable

BOSTIK SEAL 'N' FLEX FC is commonly used in a variety of industrial and commercial applications, including sealing floor joints in warehouses, car parks, and other facilities with heavy vehicle traffic. Its fast-curing properties make it ideal for situations where downtime must be kept to a minimum, while its high strength and chemical resistance ensure that it will provide long-lasting protection for the joint.


Application

---

Limitation

---

• Bostik Seal ‘N’ Flex FC should not be used in highly chlorinated areas such as swimming pools, spas etc.

• Bostik Seal ‘N’ Flex FC should not be used in glazing applications subject to UV light radiation or direct sunlight exposure.

• Bostik Seal ‘N’ Flex FC should not be applied or finished with wet tooling techniques, using solvents, water or detergent/ soap solutions.

• Bostik Seal ‘N’ Flex FC sealant should not be applied to unpredictable porous surfaces such as marble, limestone, or granite unless a standard of appearance has been agreed on as a result of testing for stain and/or discoloration.

• Do not use in interior or exterior structural sealing below the waterline in marine applications.

• Do not use in applications less than 5mm in width or less than 6mm in depth.

• Do not apply to surfaces with special protective or cosmetic coating such as mirrors, reflective glass or surfaces coated with Teflon, Polyethylene, Polypropylene or PTFE.

Colour

---

• Grey

• White

• Black

Packaging

---

• 600 ml / sausage (20 sausage / box)